Adjusting The Myride™ Suspension System - Toro Z Master Commercial TURBO FORCE 3000 Series Operator's Manual

Adjusting the MyRide™
Suspension System
The MyRide™ suspension system adjusts to provide
a smooth and comfortable ride. You can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
Adjusting the Rear-Shock
Assemblies
The slots for the rear-shock assemblies have
detent positions for reference. You can position the
rear-shock assemblies anywhere in the slot, not just
in the detent positions.
The following graphic shows the position for a soft or
firm ride and the different detent positions
Figure 14
1. Firmest position
2. Softest position
Note:
Ensure that the left and right rear-shock
assemblies are always adjusted to the same positions.
(Figure 14).
g030065
3. Detents in the slots
Adjust the rear-shock assemblies
20
(Figure 15).
Figure 15
g030024
g030019