Using The Fuel-Shutoff Valve; Using The Drive-Wheel-Release Valves; Transporting The Machine - Toro Z Master Commercial TURBO FORCE 3000 Series Operator's Manual

With 60in side discharge mower
Hide thumbs Also See for Z Master Commercial TURBO FORCE 3000 Series:
Table of Contents

Advertisement

Using the Fuel-Shutoff
Valve
The fuel-shutoff valve is located under the seat. Move
the seat forward to access it.
Close the fuel-shutoff valve for transport, maintenance,
and storage.
Ensure that the fuel-shutoff valve is open when
starting the engine.
Figure 39
1. On position
Using the
Drive-Wheel-Release
Valves
WARNING
Hands may become entangled in the rotating
drive components below the engine deck,
which could result in serious injury.
Shut off the engine, remove the key, and allow
all moving parts to stop before accessing the
drive-wheel-release valves.
WARNING
The engine and hydraulic-drive units can
become very hot. Touching a hot engine or
hydraulic-drive units can cause severe burns.
Allow the engine and hydraulic-drive units
to cool completely before accessing the
drive-wheel-release valves.
g008948
2. Off position
The drive-wheel-release valves are located in the
back of each hydraulic-drive unit, under the seat.
Note:
Make sure that the release valves are in the
fully horizontal position when operating the machine
or severe damage to the hydraulic system can occur.
1.
Disengage the blade-control switch (PTO), turn
the ignition key to the O
levers to the N
parking brake, and remove the key.
2.
Rotate the release-valve levers vertically to push
the machine
(Figure
Note:
This allows hydraulic fluid to bypass the
pump enabling the wheels to turn.
3.
Disengage the parking brake before pushing
the machine.
1. Vertical to push the
machine
4.
Rotate the release-valve levers horizontally to
run the machine

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
the necessary brakes, lighting, and marking as
required by law. Please carefully read all the safety
instructions. Knowing this information could help you,
your family, pets, or bystanders avoid injury.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents causing personal
injury.
Do not drive the machine on a public street
or roadway.
31
position, move the
FF
-
position, engage the
EUTRAL
LOCK
40).
Figure 40
2. Horizontal to run the
machine
(Figure
40).
g029831

Advertisement

Table of Contents
loading

This manual is also suitable for:

75936

Table of Contents