Aiphone IXG System Operation Manual page 87

4
Settings and Adjustments
Entry
OPTION RELAY CONTROL Select Enable / Disable for
Relay Output 1 Schedule
Daily Schedule
Weekly Schedules
Configuring on the station
Description
RANGE Select the Output Time
(TIMER) Range for relay output if
"FUNCTION (→page 85)"
is set to "Door Release".
Option Relay Control when
using the speed dial of IXG-
MK to control the output.
This can be controlled as
optional relay if set to
"Enable." If "Option Relay
Control Authentication Key"
is not configured, this will
not operate even if set to
"Enable." Be sure to
configure "Option Relay
Control Authentication Key"
via Web configuration or
the IXG Support Tool.
Configure the schedule to
perform relay output. Refer
to "How to configure Relay
Output Schedule (Daily
Schedule) (→page 108)"
for information on how to
configure this.
Start Set the time to start the
relay output.
End Set the time to end the
relay output. If this is set
earlier than "Start," the end
time will be for the following
day.
Configure the schedule to
perform relay output. Refer
to "How to configure Relay
Output Schedule (Weekly
Schedule) (→page 110)"
for information on how to
configure this.
Start Set the time to start the
relay output.
End Set the time to end the
relay output. If this is set
earlier than "Start," the end
time will be for the following
day.
87
Settings
• 200 to 2000 msec: 400 msec
Select this to set a
time between 200 and
2000 msec (by 200
msec). Enter the time
in "TIMER."
• 3 to 600 sec: Select
this to set a time
between 3 and 600
sec (by 1 sec). Enter
the time in "TIMER."
• Enable Disable
• Disable
- -
- -
00:00 - 23:59 -
00:00 - 23:59 -
- -
00:00 - 23:59 -
00:00 - 23:59 -
Default values