Aiphone IXG System Operation Manual page 80

4
Settings and Adjustments
Entry
Incoming Call Setting 3
AUTO ANSWER
Communication
COMMUNICATION TIMER
FORCE TOUCH-TO-TALK
Transfer *1
Absent Transfer
Absent Transfer Settings
Delay Transfer
Delay Transfer Settings
Configuring on the station
Description
Select ON / OFF to
automatically answer the
individual call.
AUTO ANSWER: When
receiving an individual call,
answer automatically.
When receiving a call from
VoIP Phone and
transferring a call, it must
be answered manually
Set the communication
timer when placing a call.
Communication timer when
receiving a call is set at the
destination station.
Select Enable / Disable for
Force Touch-to-Talk when
starting communication in
handsfree mode.
An incoming call can be
automatically transferred to
the transfer destination if it
is received while absent
transfer is set.
Select Enable / Disable for
Absent Transfer.
If ""How to configure
Absent Transfer settings
(→page 93)"" is not
configured, this cannot be
set to "ON." The setting can
also be changed with the
TRANSFER button on the
station.
An incoming call can be
automatically transferred to
the transfer destination if it
is received when delay
transfer is set and not
answered over a certain
period of time (Delay Time).
Select Enable / Disable for
Delay Transfer.
If ""How to configure Delay
Transfer settings
(→page 94)"" is not
configured, this cannot be
set to "ON."
80
Settings
• ON (Auto Answer) OFF
• OFF (No Auto Answer)
• 30 - 600 seconds: 60 sec
Configure between 30
to 600 sec (by 1 sec).
• ∞ (infinite): The call
will continue until the
call is ended.
• ON OFF
• OFF
- -
• ON (absent transfer OFF
enabled)
• OFF (absent transfer
disabled)
- -
• ON (delay transfer OFF
enabled)
• OFF (delay transfer
disabled)
Default values