Aiphone IXG System Operation Manual page 82

4
Settings and Adjustments
Entry
URGENT PAGE RESPONSE (administrator
privileges only)
Monitor
MONITOR TIMER
SCAN MONITOR DWELL TIME
Scan Monitor Settings
Record *2
MANUAL RECORD
Configuring on the station
Description
Configure whether to refuse
communication or ending
operations on the
destination station, when
an urgent page is sent.
Urgent message pages and
urgent external input pages
cannot be refused.
Set the monitoring timer by
station. Scan Monitor must
be end manually.
Scan monitoring will not
end unless end operations
are performed.
Scan monitoring:
A function that monitors the
following stations by
automatically switching in
intervals.
• Entrance Station
• Door Stations of outside
areas
• Door Stations of the
same room
• Network Camera
Set the dwell time to
change destination for scan
monitor.
Configure the stations and
network cameras to
perform scan monitoring.
Refer to "How to configure
Scan Monitoring
(→page 101)" for
information on how to
configure this.
Select ON / OFF for manual
recording.
82
Settings
• ON (refuse) OFF
• OFF (do not refuse)
• 10 - 600 sec: 60 sec
Configure between 10
and 600 sec (by 1
sec).
• ∞ (infinite): No timeout.
• 5 sec 5 sec
• 10 sec
• 30 sec
- -
• ON ON
• OFF
Default values