Cable Disposition; Cassette Loading And Removal - Sony FLEXICART BFC-1 Installation Manual

Multi cassette system

Hide thumbs Also See for FLEXICART BFC-1:

Table of Contents

Enlarged version

4-13-7. Cable Disposition

. Dispose the cables with sufficient length to draw the VTR for

the maintenance.

. When one VTR is installed, the cable disposition is shown in

the figure. When two or more VTRs are installed, dispose the

cables using another cable strap in the same way.

. When the factory shipment, harness fix pipe is installed at the

center of cart machine's rear side.

Therefore move the harness fix pipe out of the way for VTR

drawing depends on number and type of the VTR.

Cassettes can be loaded into any empty bins whose bin lamps are

not lit.

1. Press the DOOR OPEN key.

The elevator rises and stays in its uppermost position auto-

matically. The cart machine releases its door lock.

2. Open the door and load the cassettes.

A compartment of bins contains one L-size cassette (BETA-

CAM, D-2) or tow S-size cassettes side by side or three DV

cassettes.

3. Close the door.

Note: The cart machine allows you to load cassettes even

if the VTRs are in use. The VTRs in the cart ma-

chine can operate regardless of whether the cart ma-

chine's door is open or closed.

The elevator, however, does not move while the door

is open. Close the door as soon as cassette loading

is finished.

4-72

HARNESS

FIX PIPE

HARNESS

CLAMPER

BFC-1

Table of Contents