Sony FLEXICART BFC-1 Installation Manual page 64

3. Shutter plate installation
Install the VTR shutter plate (gold) in the cart machine. Adjust
so that the screw hole at the top of the shutter plate is the same in
height as the guide pin of the VTR. Moreover, install the shutter
plate to the height at which the screw is located in the center of
the slot.
4-48
SCREWS
(+PWH 3x6)
SHUTTER PLATE (GOLD)
VTR
EDGE
SHUTTER PLATE
(GOLD)
SLOT
SCREW
BFC-1