Sony FLEXICART BFC-1 Installation Manual page 43

. When BETACAM series (5U) and HDCAM VTRs (5U) are installed.
There are marks on this line every 1U.
The height of guide pin and attachment holes for
bracket (upper) are always equal to this mark.
Rack mount kit can be attached even if it is shifted
1/2U, but shutter plate can not be attached.
HOLES FOR
BRACKET
ATTACHMENT
BLANK PANEL
Make 1U interval
at upperside of the
every VTR.
VTR
(BETACAM)
HOLES FOR
BRACKET
ATTACHMENT
LOWEST HOLE
BFC-1
GUIDE PIN
(DRAWING SIDE)
GUIDE PIN
(DRAWING SIDE)
FL
. When MPEG IMX VTRs (4U) are installed.
There are marks on this line every 1U.
The height of guide pin and attachment holes for
bracket (upper) are always equal to this mark.
Rack mount kit can be attached even if it is shifted
1/2U, but shutter plate can not be attached.
GUIDE PIN
HOLES FOR
BRACKET
ATTACHMENT
BLANK PANEL
Make 1U interval at underside
of the lowermost VTR.
FL
4-27