Table of Contents
Advertisement
Installation
3.10 CT Connection
BX6.3_AC has internal meter, which can measure household power usage.
Please refer to figure 3-14 to install Current Transformer inside the main
distribution panel for the current flow sensing.
- When installing this product you must adhere to the following instructions:
● The product is intended to be installed and operated by qualified personnel or
service personnel only.
● Do not power up the device before installation is complete.
● All circuit breakers must be in the OFF position before commencing installation.
1. The CT can be opened.
2. Take the CT clip on the Line conductor wire.
3. Take note of the direction of CT installation. Arrow symbol means utility grid.
4. Connect the CT wires to the device.
5. Put in the CT wire into the CT port.
DANGER : ELECTRICAL HAZARD!!
CT label direction
Figure 3-14 : Current Transformer installation
Energy meter
of the electric
utility
company
L
N
Main Breaker
34
Advertisement
Table of Contents
