Delta BX6.3 AC Series Operation And Installation Manual page 26

Installation
To install the wiring cover on BX6.3_AC, please follow the procedure below:
- BX6.3_AC has a Φ38x76 backward hole for AC and COMM wiring, use 4 screws
to fix side cover after wiring.
- For BX12.6_AC model installation, please remove the plastic cover, pass the
DC and COMM cables through pipe and attach the pipe to the wiring cover.
- Recommend screw type/ PF pipe/ conduit are shown in figure 3-8.
- It is recommended to install the wiring cover as it is used to prevent users from
touching the electric cable.
Conduit hole(mm)
34
Torque
(0.8 N・m (8 kgf・cm))
PF pipe(mm)
Φ28
Figure 3-8 : Install the wiring cover on BX6.3_AC
26