Download Print this page
Delta BX6.3_EX100 Quick Installation Manual
Delta BX6.3_EX100 Quick Installation Manual

Delta BX6.3_EX100 Quick Installation Manual

Battery storage system
Hide thumbs Also See for BX6.3_EX100:

Advertisement

Quick Links

Descriptions of Components
Object
Delta BX6.3_EX100
Quick Installation
Guide
Wiring Cover
Wire
H4 Connector
Dimensions and Interface Overview
unit: mm
Qty
Description
1
Battery pack
The Instruction to provide the
1
information of safety, installation
and specification.
Protective cover to prevent users
1
from touching the power cable
3
To connect with BX6.3 series
2 pairs
DC String inputs
520
BT+
BT-
Ex Comm.
Battery Earth
Battery Storage System
Quick Installation Guide
Do not open this product or insert tools due to shock and fire hazard
which may cause injury.
When installing this product you must adhere to the following instructions:
● The product is intended to be installed and operated by qualified
personnel or service personnel only.
● Do not power up the device before installation is complete.
● All circuit breakers must be in the OFF position before commencing
installation.
● Do not install BX6.3_EX100 near or on flammable surfaces.
● Please mount BX6.3_EX100 tightly on a solid / smooth surface.
● Install BX6.3_EX100 in a location that prevents damage from flooding.
● Do not expose BX6.3_EX100 to ambient temperatures above 60°C
or below -20°C.
● Operating or storing BX6.3_EX100 in temperatures outside its
specified range might cause damage to BX6.3_EX100.
Danger to life through electric shock
Potentially fatal voltage is applied to the unit during operation.
Voltage persists 60 seconds after disconnection of power supply.
Never open the unit. The unit contains no components that must be
maintained or repaired by the operatoror installer.
Opening the housing will void the warranty.
60 seconds
Installation
100 mm
* Please refer to regulation AS/NZS 5139:2019 for detail installation space
requirement. To avoid extra fireproof cement sheeting installation requirement,
it is recommended to keep at least 300mm between the wall and BX.
230
Please keep enough space for wiring and pipping.
(Max.: 400 mm)
BX6.3_EX100
BX6.3_EX100
Warning
100 mm
100 mm
>30 mm*
100 mm

Advertisement

loading

Summary of Contents for Delta BX6.3_EX100

  • Page 1 ④ ⑤ ● Do not install BX6.3_EX100 near or on flammable surfaces. ● Please mount BX6.3_EX100 tightly on a solid / smooth surface. ● Install BX6.3_EX100 in a location that prevents damage from flooding. Object Description ● Do not expose BX6.3_EX100 to ambient temperatures above 60°C ①...
  • Page 2 1. Drill 4 holes with Φ16 mm diameter in dimension 490mm x 200mm. 2. Insert Rawlplugs into the holes. Ground 3. Fix the foot of BX6.3_EX100 firmly. 4. Tighten the nut to stretch the rawlplug. * BT+/-: Recommended cable length (about 1000mm) / 12AWG BX6.3_EX100...