Lap - Ducati Diavel 2014 Owner's Manual

LAP

LAP activation/deactivation function
This function allows enabling/disabling LAP (lap time)
function.
To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the
"LAP" function and press the reset button (4) to shift to
next page.
Function status is highlighted on the display (green if
ON or yellow if OFF); use buttons (1) or (2) to move
the left arrow on the new setting, and press the reset
button (4) to confirm.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
If "OFF" is saved, LAP function will be disabled. If "ON"
is saved, LAP function will be enabled (see "LAP
Recording" page 51 paragraph).
Note
When "LAP" function is active, flash button (3)
takes on the dual function of high beam "FLASH" and
LAP timer Start / Stop.
100