Ducati Diavel 2014 Owner's Manual page 128

PIN CODE changing procedure
This function allows changing your own 4-digit PIN
CODE.
To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the "PIN
CODE" function and press the reset button (4) to shift
to next page.
Note
If, when accessing this function, "INSERT NEW
PIN" and a string of dashes "- - -" are displayed,
function is not active as PIN CODE has never been
entered. Enter your PIN code with the "PIN enabling"
function.
If, when accessing this function, the round display
shows "MODIFY PIN CODE" and "OLD PIN" and four
dashes " - - - -" highlighted in green, a PIN CODE is
already set; so the 4-digit code must be entered.
Note
To change the PIN code, you must remember
the already stored PIN.
Now you will have to enter the "old" PIN (OLD PIN).
Press the reset button (4); each time button (2) is
pressed, the highlighted number increases from "0" to
"9" and then goes back to "0"; to confirm the desired
number press the reset button (4).
Repeat the procedure until entering the four digits;
press the reset button (4) again to confirm. If the
entered code is not correct, the instrument panel will
show again the four dashes " - - - - " to allow user to
repeat the code entering procedure. While if the
entered code is correct, "CORRECT" will be
automatically highlighted in green for approx. 2
seconds and then the four dashes " - - - - " will be
automatically highlighted close to "NEW PIN"; now
you can enter the "new" 4-digit code.
Press the reset button (4); each time button (2) is
pressed, the highlighted number increases from "0" to
"9" and then goes back to "0"; to confirm the desired
number press the reset button (4).
Repeat the procedure until entering the four digits;
press the reset button (4) again to confirm.
"MEMORY" is automatically highlighted.
127