Ducati Diavel 2014 Owner's Manual page 126

PIN CODE activation function
To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the "PIN
CODE" function and press the reset button (4) to shift
to next page.
Note
If "MODIFY PIN CODE" appears when
accessing this function, this means that there is
already a stored PIN and therefore the function is
already active.
If, when accessing this function, the round display
shows "INSERT NEW PIN CODE" and four dashes " -
- - -" highlighted in green, a PIN CODE is not already
set; so a 4-digit code must be entered.
Entering the code:
press the reset button (4).
Each time button (2) is pressed, the highlighted
number increases from "0" to "9" and then goes back
to "0"; to confirm the desired number press the reset
button (4). Repeat the procedure until entering the
fourth digit.
Press the reset button (4) again to highlight
"MEMORY" option.
To memorise the entered PIN code, keep the reset
button (4) pressed for 3 seconds, with "MEMORY"
highlighted in green. "MEMORIZED" will be displayed
for approx. 2 seconds to confirm that the PIN was
correctly memorised. "EXIT" will then be
automatically highlighted.
From this moment, "MODIFY PIN CODE" will be
displayed when accessing the "PIN CODE" function
and the PIN can be changed again as many times as
necessary.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
125