Sakai SW300 Operating & Maintenance Instructions page 68

[ 3. PERIODICAL MAINTENANCE
2) Brake shim
After completing the installation of separate plate
(013) and friction plate (012), install brake shim
(014). In principle, use the same shims (014) which
were in use before disassembling. However, if the
brake piston (003) stroke has exceeded the
specified range (See "Inspection after replacement"
later herein), it is necessary to add or remove shim
(014).
[Break down of the brake shim package]
DCM0280
Dwg. No. 1745162 - S
Shim thickness
0.8 x 1
0.4 x 1
0.2 x 1
0.1 X 1
The "Brake shim package" shipped for service use, contains number of shims shown
in this chart above.
-62­