Connection And Disconnection Of Booster Cables - Sakai SW300 Operating & Maintenance Instructions

[ 2. OPERA TION
2.16.1 Connection and disconnection of booster cables
When jump-starting the engine, connect the booster cables as follows:
• Connection of booster cables
1) Connect one end of the positive booster cable
®
to
the positive (+) terminal of the battery on the
machine.
2) Connect the other end of the positive booster cable
to the positive (+) terminal of the booster supply.
3) Connect the negative booster cable
®
to the
negative (-) terminal of the booster supply.
4) Connect the other end of the negative booster cable
to a good earth of the engine block of the machine.
• Disconnection of booster cables
1) Disconnect the negative booster cable
®
from the
engine block earth.
2) Disconnect the negative booster cable
®
from the
booster supply.
3 Disconnect the positive booster cable
®
from the
booster supply.
4) Disconnect the positive booster cable
®
from the
machine.
A
WARNING - - - - - - - - - - - ­
• Do not allow the positive (+) terminal to make
contact with the negative (-) terminal when
connecting the booster cables.
• Wear safety goggles when jump-staring the
engine.
• Do not allow the machine to make careless
contact with the booster supply.
• Do not make wrong connections. Connect the
negative (-) cable to the engine block earth far
away from the battery, as sparks may occur
when connecting.
®
®
'+\
Q)
~~
Booster supply
®
Batteries of the
B
machine
@
Connect to the engine block
earth of the machine
®
@
r--s::!:i!ie=il
~I
leo
I I
IIII(+:
®
®
e
~
Booster supply
®
Batteries of the
B machine CD
Disconnect from the engine
block of the machine
ffi
x~
A
CAUTION - - - - - - - - - - - - - - - - - - - - - - - - ,
• Use booster cables and end clips of proper size suited to the battery capacity.
• Use the batteries of the equal capacity for the machine and booster supply.
• Check booster cables and end clips for signs of damage and corrosion.
• Connect the clips positively.
-46­