Loading And Unloading - Sakai SW300 Operating & Maintenance Instructions

I
A
WARNING: Negligence of these instructions can lead to accidents.
1. BASIC PRECAUTIONS FOR SAFETY
• Do not operate the machine except from the operator's seat. Do not drive in a
standing posture.
• While making turns, do not run at abnormally high speed and do not turn the
steering wheel abruptly and sharply.
• For the traveling on structures such as a bridge, make certain that they can support
your machine. Before traveling on the structure, you must know the load capacity of
the structure and the load weight of the machine you are operating to insure safe
travel across the structure.
• Do not make turns on a slope and do not travel across sidehill. If necessary to do
so, go down straight along the slope to the flat ground, move sideways and go up
straight to the destination.
x
• When parking.
• Select level and hard ground. l o f necessary to park on a
slope, block the front of the drums on the downside of
the slope.
• When required to park on the public road, provide
necessary markings such as flag, barriers and
illumination. However, be sure they do not obstruct
traffic.
• When getting off the machine, stop the engine and
remove the key from the ignition switch.
1.6 Loading and Unloading
• Loading and unloading can accompany any
danger. Use extreme care.
• Select level and hard ground leaving a sufficient
distance from the shoulder.
• Use sturdy ramps with proper width, length and
thickness which allow safe loading and unloading.
If they deflect considerably under load, apply
wooden blocks to reinforce the ramps.
-10­