Applicable Jobs; After Operation - Sakai SW300 Operating & Maintenance Instructions

Table of Contents

Advertisement

I
2. OPERATION
2.7 Applicable Jobs
The machines do a variety of jobs as listed below:.
Work
• Asphalt road paving
• Dust removal treatment for road
• Road improvement
• Embankment construction
• Dam construction
• Construction of forestry and tarm roads
• Foundation building
• Construction of sidewalk, shoulder and gutter foundation
Material to be compacted
• Asphalt pavement
• Crusher run
• Cement concrete
• Sands
Layers to be compacted
• Surface course, Binder course
• Base course
• Subgrade
2.8 After Operation
• Soils
• Slag
• Soft rock
• Embankment
• Shoulder
• Sidewalk
Follow the procedures below to prevent the machine from falling into an unworkable condition
the following morning caused by muds and other extraneous matter on the drum, or frozen
drums:
1) Remove muds and water from the machine. Muds can get into the seals together with
water drops on the hydraulic cylinder piston rod. Damaged seals will result.
2) Park the machine on a hard and dry surface. H such a place is not available, cover the
ground with hard plates.
3) Low temperature will cause a significant reduction of battery efficiency. Cover batteries or
take them off from the machine and store in a warm place for the following day's operation.
4) To avoid freezing, fully drain the sprinkler tank, pipes and filter in cold weather.
See" To drain water "on page 35.
,IMPORTANT
I
Insufficient draining can cause damages to the system or create other troubles.
• Do not wash clean with high pressure water around the instrument panel or
reverse side of the dash board. This can instrument failures.
-37­

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sw320Sw330

Table of Contents