Fuse Box; Handling And Adjustments; Seat Adjustment - Sakai SW300 Operating & Maintenance Instructions

I
2. OPERATION
I
Brake pedal
In an emergency, push down on the pedal to the full extent, and the machine will come to a
sudden stop.
IMPORTANT
Do not use the pedal wherever practicable except for an emergency. If used during
the compacting operation of asphalt pavement, this can cause damage to its
surface.
NOTE: Depressing the brake pedal brings the F-R lever into neutral (N).
2.1.5 Fuse box
A WARNING - - - - - - - - - - - - - ,
When changing a fuse, cut the power supply by
turning the starter switch to the OFF position.
Fuses protect electrical components and wiring
from burning. Change any fuse which has become
powder-coated due to deterioration or which has a
play between it and fuse holder. To replace fuses,
take off the cover. Be sure to use fuses of correct
capacity.
2.2 Handling and Adjustments
2.2.1 Seat adjustment
Adjust the
seEd for your best operating position. Move the
lever as shown by arrow. With the lever held in that position,
slide the seat .forward or backward as desired. When
properly adjusted, release the lever.
20rpY2.;~,,~"
15A
~
(r/ .>
~~~OA
15A
~
...
(Spare fuse) 20A (Spare fuse)
t~
~~~.--
I\~~
A W A R N I N G - - - - - - - - - - - - - - - - - - - - - ­
The adjustment w.iII be necessary when operating the machine first or when
operators are alternated.
-25­