Sakai SW300 Operating & Maintenance Instructions page 21

A
WARNING: Negligence of these instructions can lead to accidents.
1. BASIC PRECA UTIONS FOR SAFETY
• Be careful of high pressure hydraulic fluid.
• Bear in mind that the working equipment hydraulic
systems are under internal spressure. Do not perform
adding, draining, inspection or servicing of the
hydraulic systems until the internal pressure has been
relieved. Hydraulic fluid leaking through a fine hole at
high pressure can penetrate your skin and eyes.
Inspect leakage by holding a hard board close to
suspected leaks wearing goggles. If affected by high
pressure oil, get medical help immediately.
• Be careful of hot parts
• After the machine has been operated for some time,
the coolant, engine oil and hydraulic fluid will become
hot.
• Removing the radiator cap or draining the coolant or oil
can burn you. Perform this work in accordance with
correct procedures after the systems have cooled
down.
• Use care when inspecting or servicing fan or belts in motion
• Secure loose clothing and keep articles away that
could get caught in moving parts.
• Do not let your body or tools make contact with the fan
blades or belts. They can be cut seriously.
• Used oil disposal
• Do not throw used oil into a drain or waterway. Drain
the oil from the machine into a proper container. Do not
drain directly on the ground.
• Obey all local, state and federal environment
regulations for the proper disposal of oil, fuel, coolant,
battery electrolyte or any other fluids.
s*
v