Sakai SW300 Operating & Maintenance Instructions page 26

[ 2. OPERATION
I
Monitor display
I
Hydraulic oil filter warning lamp-----,
Goes on when filter is clogged.
Battery charge lamp
Goes on when troubles
have occurred in electric
system while engine is
I
running. / ,
f:!I
Ji
r - - -
Turn signal indicator lamp (OPTION)
Flashes when turn signal lever is moved.
r -
Engine oil pressure warning lamp
Goes on when engine lubricating oil
pressure is lowered below specified value.
,.-- Parking brake indicator
lamp
Goes on when parking
r
I ,
brake is engaged.
.<:-~
(®)
~
N'
!JD~
[
~
J_,ngpl u g
I n d r e ~ r
Sprinkler indicator lanp
lamp
Goes on when sprinklinQ is performed.
Goes on when starter
switch is turned to
HEAT.
I - ­
Vibrator Indicator lamp
Goes on when vibrator operates.
Flood lamp indicator lamp------J
Goes on when flood lamps are lighted.
*
Indicator lamps [
~[
®
)W~l
J\I'
100 ]
Light up when corresponding systems have been operated.
*
Warning lamps [
I
f:!I )
00[
.(§).] ]
Go on when the starter switch is turned to the ON position and go off when the engine has
started. If any of them lights up while the engine is running, this indicates a faulty
condition. Stop the engine and trace the source of trouble.
*
Bulb failure check
= Warning lamps and parking brake indicator lamp =
They should go on when the starter switch is turned to the ON position.
If not, corresponding bulb has burnt out.
CAUTION: - - - - - - - - - - - - - - - - - - - - - - - ­
Hydraulic oil filter warning lamp may go on when the engine rpm is increased
before the engine has been warmed up enough. Keep the engine idling until the
lamp goes off, before starting your work.
-20­