Self-Propelling - Sakai SW300 Operating & Maintenance Instructions

2. OPERA TlON
I
3) Draw the wire rope from the trailer winch and put its
hook on the hooking point
CD
or (2) of the roller.
4) With the starter switch placed at OFF position,
disengage the brake manually. (See page 26)
5) Unload button is located in engine room. Press the
unload button to unload. (See page 24)
6) Use the winch of truck for loading and unloading.
7) After loading or unloading, return the brake, which has
been disengaged, to original to original position and
start the engine once. Unload button will reset auto ­
matically.
8) Locate the machine correctly on the trailer.
2.9.2 Sel'f-propelling
1) Engage the trailer brake and chock its wheels. Fix the ramps so that the machine and
trailer are completely aligned.
*
The angle between the ramps and ground must be
less than 15 degrees.
*
Leave a proper space between the ramps
according to the width of the roller drum.
Blocks
2) Decide the correct direction of run and conduct loading
or unloading at low speed.
Forward Backing at
run at low speed
For loading, run forward at loW speed.
For unloading, run backward at low speed.
JB§I~
3) Locate the machine correctly on the trailer.
-39­