Related Manuals for fantastic furniture ZAYNE
Summary of Contents for fantastic furniture ZAYNE
- Page 1 Version 1.0 TWO PEOPLE ZAYNE Utility 4 Shelf 2 Door Oak White REQUIRED www.fantasticfurniture.com.au...
- Page 2 Recommended weight capacity : 15kgs/shelf. WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY. To avoid any serious or fatal injury, this product has been supplied with a wall strap to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface.
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What you need to assemble the product Top Panel (P1) DO NOT USE Right Side Additional Tools Required Panel Phillips head screwdriver; (P4) Back Panel (P6) Divider Panel (P7) Left Side Door Panel (P9) Shelf Panel (P3) (P5) Door (P8) Back Panel Parts list (P6) - Page 5 Step 1 You will need (P4) Phillips head 4 x Cam Bolts screwdriver (H3) (P3) Insert 2 x Cam Bolts (H3) into Left Side panel (P3) and 2 x Cam Bolts (H3) into Right Side panel (P4). Secure by tightening Cam Bolts (H3) with a Phillips Head Screwdriver. Step 2 You will need Phillips head...
- Page 6 Step 3 Ensure PVC edge face up. (P7) You will need (P5) 2 x Long 2 x Large Dowels (H15) Screws (H2) Phillips head screwdriver Insert 2 x Long Dowels (H15) into Divider panel (P7), attach to Shelf panel (P5) and secure with 2 x Large Screws (H2) by tightening with a Phillips Head Screwdriver.
- Page 7 Step 5 (P3) You will need (P5) 2 x Cam Nuts 2 x Dowels (H4) (H1) Phillips head screwdriver Insert 2 x Dowels (H1) & 2 x Cam Nuts (H4) into Shelf panel (P5). Attach Left Side panel (P3) to Shelf panel (P5) and secure by tightening Cam Nuts (H4) with a Phillips Head Screwdriver.
- Page 8 Step 7 (P6) Make sure with laminating face inside. (P7) (P4) (P3) Slide Back panel (P6) into the grooves of the Left Side panel (P3) and Right Side panel (P4) as shown. Step 8 You will need (P2) 6 x Dowels Large (P4) (H1)
- Page 9 Step 9 You will need (P2) 4 x Felt Pads (H14) Apply 4 x Felt Pads (H14) to the Bottom panel (P2) as shown. Step 10 You will need Phillips head 6 x Cam Bolts screwdriver (H3) (P1) Insert 6 x Cam Bolts (H3) into Top panel (P1) and secure by tightening Cam Bolts (H3) with a Phillips Head Screwdriver.
- Page 10 Step 11 Make sure with laminating (P6) face inside. (P3) (P7) (P4) Slide Back panel (P6) into the grooves of the Left Side panel (P3) and Right Side panel (P4) as shown. Step 12 (P1) You will need (P3) 6 x Cam Nuts 6 x Dowels (H4) (H1)
- Page 11 Step 13 You will need 4 x Metal Rods 4 x Rollers (H7) (H6) 8 x Roller Phillips head Screws (H5) screwdriver (P8) (P9) Insert 2 x Metal Rods (H7) into Door panel (P8) as shown. Attach 2 x Rollers (H6) to Door panel (P8) and secure by tightening 4 x Roller Screws (H5) with the Phillips Head Screwdriver.
- Page 12 Step 15 You will need (P1) 1 x Safety 1 x Safety Strap Strap (H11) Screw (H12) (P6) 1 x Washer 8 x Wedges (H13) (H8) (P6) 8 x Back Screws Phillips head (H9) screwdriver Insert 8 x Wedges (H8) into all corners of the back of the assembled unit as shown. Secure Wedges (H8) by tightening 8 x Back Screws (H9) with the Phillips Head Screwdriver.
-
Page 13: Job Complete
Step 17 Wall You will need Screw 1 x Washer Phillips head screwdriver (H13) Screw and Wall Plug are not provided. Please use appropriate fixtures for your wall. Move the unit into it’s final position and then secure the Safety Strap to the wall. Ensure it is firmly attached. - Page 14 Attaching units together Vertical attachment You will need 8 x Back 2 x Brackets Screws (H9) (H10) Phillips head screwdriver Additional hardware has been provided to join units together. To connect 2 units use 2 x Brackets (H10) and secure by tightening 8 x Screws (H9) with the Phillips Head Screwdriver. An example of how to attach units vertically or horizontally has been provided.