Page 2
WA RNI NG WA RN NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Lay out all of the components on a soft surface Read Instructions carefully. as if you were preparing to do a jigsaw puzzle. Check no parts are missing.
What you Need To Assemble the Body Socket Wrench (provided) Top Glass (P1) 4x Threaded Rod 4x Legs 4x Washers 4x Spring Washers (H1) (H2) (H3) (H4) 4x Nuts 4x Foot (H5) (H6) Please make sure you have all these parts before you start.
Page 4
4x Threaded Rod (H1) 1x Top Glass (P1) Insert each Threaded Rod(H1) into disc on Top Glass (P1) surface and fasten tightly by hand. Step 2 4x Legs (H2) (H5) 4x Washers (H4) (H3) (H3) (H6) 4x spring washers (H4) (H2) 4x Nuts (H5)
Page 5
ALWAYS PICK UP THE TABLE BY THE TOP WHEN MOVING OR TURNING OVER. DO NOT DRAG OR TURN OVER THE TABLE BY THE LEGS. Page 5...