(P1) Phillips Head Screwdriver (P5) (P2) (P3) (P4) Parts List Backrest(P1) Right Leg(P2) Left leg(P3) Front Rail(P4) Seat(P5) Hardware Pack 1 x Allen Key 4 x Short Bolts 2 x Long Bolts 4 x Self-Tapping Screws (H1) (H2) (H3) (H4)
Page 5
1 x Allen Key 4 x Short Bolts (H4) (H1) Attach backrest(P1) to right leg(P2) and left leg(P3) with 4 short bolts(H1) using allen key(H4).Do not tighten bolts fully. Step 2 2 x Long Bolts 1 x Allen Key (H2) (H4) Attach front rail(P4) to right leg(P2) and left leg(P3) with 2 long bolts(H2)using allen key(H4).Do not tighten bolts fully.
Page 6
Step 3 Front of Seat This distance approx 5cm Phillips 4 x Self-Tapping Screws Head Screwdriver (H3) (P5) (P2,P3,P4) Back of Seat Attach seat(P5) to seat frame(P2,P3,P4) with 4 x self-tapping screws (H3) using phillips head screwdriver.Carefully position seat as shown. There should be an approximate 5cm gap between the front seat edge and seat frame as shown.