FLIR Ariel CM-3202-11-I Installation And User Manual page 34

Operation
• Baseline Profile (not available for H.265 codec): Primarily for low-cost applications that require
additional data loss robustness, such as videoconferencing and mobile applications. This is the most
common profile used in IP security cameras due to the low computational cost of processing the
video.
Resolution: When NTSC is selected as the Video Format on the Visible page, the supported resolutions
appear in the following table (at 30 FPS for all codecs).
1920x1080
1280x720
720x480
When PAL is selected as the Video Format on the
720x480.
DSCP (Differentiated Services Code Point): Specify a value between 0-63. The default DSCP value is 0
(DSCP disabled).
The DSCP value defines the priority level or QoS (Quality of Service) for the specified type of traffic. The
higher the value that is entered, the higher the priority, which reduces network delay and congestion.
The camera supports the Video DSCP class, which consists of applications such as HTTP, RTP/RTSP,
and RTSP/HTTP.
CM-3202-11-I Installation and User Guide Revision 100
Stream 1 Stream 2
OFF
1280x720
720x480
OFF
1920x1080
1280x720
720x480
OFF
1920x1080
1280x720
720x480
Visible
This document does not contain any export-controlled information.
Stream 3
OFF
OFF
720x480
OFF
1280x720
720x480
OFF
OFF
720x480
OFF
720x480
OFF
1920x1080
1280x720
720x480
OFF
OFF
1280x720
720x480
OFF
1920x1080
1280x720
720x480
OFF
1920x1080
1280x720
720x480
page, 720x576 is supported instead of
June 2020 26