FLIR Ariel CM-3202-11-I Installation And User Manual page 85

Appendices
Problem
Streaming video image is
hanging (stopped)
Bluish picture in an indoor
scene (possibly mixing
indoor and outdoor
lighting)
Reddish picture and
incorrect colors in the
image
CM-3202-11-I Installation and User Guide Revision 100
Confirm the unit's video streaming settings.
Refresh your browser screen (F5).
Check that the bandwidth and bit rate settings of the network are set
properly.
Check that other processes and applications are not causing undue
latency.
Check that the firewall analysis or blocking is not interfering with the
video stream and supports the required ports and communication
protocols.
Change the White Balance Mode to Auto. If the lighting in the scene is
fixed, manually adjust the White balance to an acceptable image.
Check the PoE power supply and associated network cables. Connect
directly to the PoE and compare the images. If the problem persists,
contact support.
This document does not contain any export-controlled information.
Possible Solution
June 2020 77