Basic Items For Service; Check Points After Servicing; Jigs List - Pioneer RMX-1000 Service Manual

1

3. BASIC ITEMS FOR SERVICE

3.1 CHECK POINTS AFTER SERVICING

A
Items to be checked after servicing
To keep the product quality after servicing, confirm recommended check points shown below.
No.
1 Check the firmware version.
2 Confirm whether the customer complain has been solved.
3 Check the analog audio input.
4 Check the analog audio output.
Check the buttons, volumes, LEDs.
5
B
Check the connection of each interface.
6
USB B
7 Check the appearance of the product.
See the table below for the items to be checked regarding audio.
Item to be checked regarding audio
Distortion
Noise
C
Volume too low
Volume too high
Volume fluctuating
Sound interrupted
D

3.2 JIGS LIST

Jigs List
Jig Name
USB cable
SD memory card
E
remixbox
Lubricants and Glues List
Name
Grease
F
6
1
2
Procedures
Part No.
GGP1193
Marketing product
Supplied software
Part No.
GYA1001
RMX-1000
2
3
The firmware version must be the latest one.
If it is not the latest one, be sure to update it.
The customer complain must not be reappeared.
Audio and operations must be normal.
Audio and operations must be normal.
Audio and operations must be normal.
Make sure that all buttons, volumes and LEDs function properly
in the test mode.
Connect a product and a PC, and can confirm the version
on the remixbox.
No scratches or dirt on its appearance after receiving it for service.
Purpose of use / Remarks
for PC connection
For firmware update, only SD memory cards or SDHC memory
cards conforming to SD standards can be used.
Read / Write user data,
please download remix box from the pioneer homepage.
Refer to "9.4 CONTROL PANEL SECTION (2/2)".
3
4
Check points
Remarks
4