Basic Items For Service; Check Points After Servicing; Jigs List - Pioneer DDJ-WEGO-K Service Manual

1

3. BASIC ITEMS FOR SERVICE

3.1 CHECK POINTS AFTER SERVICING

A
Items to be checked after servicing
To keep the product quality after servicing, confirm recommended check points shown below.
No.
Confirm that the customer complaint has been resolved.
If the problem pointed out by the customer occurs with a specific
1 source or operation, such as PC input, AUX/MIC input, Fader, or
Volume, input that specific source then perform that specific
operation for checking.
Confirmation of operation of operating elements
2
Enter Service mode.
B
Check the analog audio output.
3 Connect this unit with a PC with the DJ application (Virtual DJ LE)
installed, via USB, then operate the DJ application (Virtual DJ LE).
Check the analog audio input.
4
Input an audio signal via AUX/MIC.
5 Check the appearance of the product.
See the table below for the items to be checked regarding audio.
Item to be checked regarding audio
C
Distortion
Noise
Volume too low
Volume too high
Volume fluctuating
Sound interrupted
D

3.2 JIGS LIST

Jigs List
Jig Name
USB cable
E
Lubricants and Glues List
Name
Grease
Adhesive
Adhesive
F
6
1
2
Procedures
Part No.
GGP1193
Part No.
PS-70
GYL1001
GYL1005
DDJ-WEGO-K
2
3
The customer complain must not be reappeared.
Audio and operations must be normal.
There must be no errors in operations of each button, Rotary
selector, Volume, Fader, Slider and JOG.
There must be no errors, such as noise, in audio signals and
operations of the MASTER/HEADPHONES outputs.
Audio and operations must be normal.
No scratches or dirt on its appearance after receiving it for service.
Purpose of use / Remarks
for PC connection
Remarks
Refer to "7. DISASSEMBLY". DAIZO NICHIMOLY NEW-SL PS-70
Refer to "7. DISASSEMBLY".
Refer to "7. DISASSEMBLY".
3
4
Check points
4