How To Import/Export User Setting Data - Pioneer RMX-1000 Service Manual

5

8.3 HOW TO IMPORT/EXPORT USER SETTING DATA

[Before Starting Repairs]
Update Setting: To back up data of the RMX-1000 unit
Save: To store backup data as a file
Update Setting
1. Connect the RMX-1000 and computer by USB cable,
then launch remixbox.
2. From remixbox's menu items, click [Edit]>[Update Setting].
The customized parameter data loaded in the RMX-1000
is imported to remixbox.
• When the RMX-1000 is shipped from the factory, the
same parameters are loaded for the [DEFAULT] and
[USER] modes.
Save
1. Click the [Save] button.
— For Windows: Explorer opens.
— For Mac OS X: Finder opens.
2. Select the location in which the RSD file is to be saved to
HDD of PC (desktop etc), give it the desired filename and
save it.
• Never designate the SD card drive of the RMX-1000 as
the destination for saving.
• Be careful not to click on the [Sync] button before saving
backup data of the RMX-1000, because by doing so the
customized parameter data will be erased and overwritten.
5
6
[After repairs are finished]
Load: To load the stored backup data on RemixBox
Sync: To restore the loaded data in the RMX-1000
Load
1. Click the [Load] button.
2. Select and open the RSD file stored before starting
repair.
The customized parameter data and sampled sound
sources in the RSD file are loaded into remixbox.
Sync
1. Connect the RMX-1000 and computer by USB cable,
then launch remixbox.
• The [Sync] button cannot be used unless the RMX-1000
and computer are connected by USB cable.
2. Click the [Sync] button.
The customized parameter data is loaded onto the RMX-1000.
After loading, [Syc] appears on the RMX-1000's BPM display
section.
The loaded customized parameter data can be checked when
the RMX-1000's [SETTING] selector switch is set to the [USER]
side.
RMX-1000
6
7
— For Windows: Explorer opens.
— For Mac OS X: Finder opens.
7
8
A
B
C
D
E
F
67
8