Basic Items For Service; Check Points After Servicing; Jigs List - Pioneer XDJ-RX Service Manual

5

3. BASIC ITEMS FOR SERVICE

3.1 CHECK POINTS AFTER SERVICING

Items to be checked after servicing
To keep the product quality after servicing, confirm recommended check points shown below.
No.
1 Confirm the firmware version.
2 Confirm whether the customer complain has been solved.
3 Check the analog audio output.
4 Check playback, using the fader function.
5 Check the MASTER output.
6 Check the headphones output.
7 Check the connection of each interface.
Playback data contained in the device connected to USB A.
USB B.
Playback the library data of the PC via LAN.
8 Check the appearance of the product.
See the table below for the items to be checked regarding audio.
Item to be checked regarding audio
Distortion
Noise
Volume too low

3.2 JIGS LIST

Lubricants and Glues List
Name
Lubricating oil
5
6
Procedure
Volume too high
Volume fluctuating
Sound interrupted
Part No.
GYA1001
6
7
The version of the firmware must be latest.
Update firmware to the latest one, if it is not the latest.
The customer complain must not be reappeared.
Audio and operations must be normal.
There must be no errors in audio output and operations of each channel.
There must be no errors in audio output and operations of each channel.
Audio and operations must be normal.
There must be no errors, such as noise, in the audio output.
Audio, Search and operations must be normal.
The PC must be linked.
The rekordbox software must be linked.
No scratches or dirt on its appearance after receiving it for service.
Refer to "9.5 CONTROL PANEL SECTION (2/3)",
"9.7 JOG DIAL SECTION".
XDJ-RX
7
8
Check points
Remarks
8
A
B
C
D
E
F
7