Maintenance And Installation; General Information; Lcd Display; Maintenance Of The Indracontrol Veh 30.1 - Bosch Rexroth IndraControl VEH 30.1 Project Planning Manual

IndraControl VEH 30.1
8

Maintenance and Installation

8.1

General Information

Maintenance
8.2

LCD Display

8.3

Maintenance of the IndraControl VEH 30.1

DOK-SUPPL*-VEH*30.1***-PR02-EN-P
The embedded terminals are maintenance-free. Some components are
subject to wear and must be replaced.
Include the following measures in your maintenance schedule:
• Clean the screen surface at least once a week with an anti-static cloth
or window cleaning agent containing denatured alcohol.
Dissolution of the keypad surface and the
display seal through contact with solvents!
Do not use any solvents (e. g. paint thinner)!
⇒
CAUTION!
• At least once a year, check all plug and terminal connections for
proper tightness and damage. Check that cables are not broken or
crushed. Replace damaged parts immediately.
A fading backlight causes a progressive deterioration of the LCD display's
readability, so that a backlight exchange will be necessary. For further
information please contact the Bosch Rexroth Service.
The IndraControl VEH 30.1 is designed for the use in the industrial
environment. It does not need any special maintenance.
We recommend to keep the device away from humidity, oils and
emulsions. If a particular degree of fouling is achieved - from the
ergonomic point of view - the IndraControl VEH 30.1 has to be cleaned
with a smooth, dry and fuzz-free cloth to restore e. g. the full grip.
Maintenance and Installation
8-1