Display And Operating Components; Operating Elements; Housing Of The Indracontrol Veh 30.1 - Bosch Rexroth IndraControl VEH 30.1 Project Planning Manual

IndraControl VEH 30.1
6

Display and Operating Components

6.1

Operating Elements

Housing of the IndraControl VEH 30.1

DOK-SUPPL*-VEH*30.1***-PR02-EN-P
Information on almost all operating elements are transmitted to the control
in form of a real time protocol and are available via a function block. For
further information please refer to chapter "Evaluation of Operating
Element Commands" on page 9-12.
General Information
An enabling switch with two actuators, that can be used appropriately
wired and evaluated in safety circuits up to category 4 (EN 954-1), is
integrated in the IndraControl VEH 30.1.
Fig. 6-1: Front view of the IndraControl VEH 30.1
Because of the concave shape of the housing (at the bottom) the operator
can easily support the device against his body and, thus, is able to stand
long fatigue-free working intervals. At the right side you can recognize one
of the actuators of the enabling switch integrated in the bottom part of the
housing.
Display and Operating Components
6-1