Slant/Slope Fine Adjustment Mode - ADA INSTRUMENTS 6D SERVOLINER GREEN Operating Manual

Line laser level

Hide thumbs Also See for 6D SERVOLINER GREEN:

Table of Contents

Available languages

Slant/slope fine adjustment mode / Auto leveling switch off

1. Switch the instrument ON. Auto leveling function is activated. Press button (9) to switch on/off the "slant / slope fine

adjustment mode".

2. It is possible to set the inclination of the horizontal plane along the axis X and Y.

3. Press and hold button H (7) to set the tilt angle of the horizontal plane along the axis X down. Press and

hold button V(5) to set the tilt angle of the horizontal plane up.

4. Press button (3) to set the tilt angle along the axis Y.

5. Bi-Bi sound mentions that you've reached the limit of slope position.

6D SERVOLINER

GREEN

Table of Contents

Chapters

Table of Contents

Do you have a question about the 6D SERVOLINER GREEN and is the answer not in the manual?