Manufacturer:
Production plant:
Tel:
Fax:
e-mail:
Web:
The persons authorized by the manufacturer to repair or replace the
parts of this system, hold authorization to work on INIM Electronics
brand devices only.
The SmartLink device described in this manual is a reserve
telephone line generator and telephone dialler.
If problems occur on the PSTN (linedown conditions, etc.), the
SmartLinkAdv will guarantee communications by switching to a GSM
provider and allowing any connected devices to operate normally.
When the SmartLinkAdv operates as a simulated line, it tests the PSTN
line periodically to check if the communication problems have cleared.
If the PSTN line is found to be operating normally and there are no
ongoing telephone calls passing through the interface, the system will
switch back to the main PSTN line. Otherwise, it will switch back to the
PSTN only when all the necessary outgoing calls have been forwarded.
SmartLinkAdv generates a series of operations (e.g. calls, output
commands) in relation to internal events (e.g. low battery) or
external events (e.g. input status changes, received call, received
SMS commands).
•
Status control and output actions via SMS messages
•
Output control and output actions via calls using the voice menu
•
Output actions via Caller ID recognition
•
Digital dialler (Ademco 10bps, Ademco 14bps, Franklin 20bps,
Radionics 40bps, Scantronic 10bps, Contact-ID, SIA-IP)
•
SMS dialler
•
Voice dialler
•
Open tamper protection
•
Jamming detector
•
Easyscan (automatic search for the best GSM provider)
6
GENERAL INFORMATION
Manufacturer's details
INIM Electronics s.r.l.
Via Fosso Antico - Centobuchi
63076 Monteprandone (AP) - Italy
+39 0735 705007
+39 0735 704912
info@inim.biz
www.inim.biz
Description of the product
and various models
Telephone dialler
Chapter 1
1-1
1-2
DESCRIPTION
RESERVE TELEPHONE
LINE
TELEPHONE DIALLER
OTHER FUNCTIONS
General information
Need help?
Do you have a question about the SmartLink Advanced Series and is the answer not in the manual?
Questions and answers