Chapter 6 Project Development And Programming; Using The Smartleague Software Program - INIM SmartLink Advanced Series Installation And Programming Manual

Installation and programming manual
The SmartLinkAdv system was designed to allow programming via
PC. All the functions relating to programming and the project are
accessible through the software program. You will need:
• a computer which can be connected to the already-installed
SmartLinkAdv.
• The SmartLeague software program
The SmartLeague software program resides on the computer of the
installer company and allows the preparation of the larger part of
the SmartLinkAdv parameters without actually being connected to
the device.
The connection is required when uploading data (writing on the
SmartLinkAdv) or
SmartLinkAdv). The type of connection depends on the means used
(refer to paragraph 4-7 PC Connection).
The programming parameters of an installation constitute the
"solution". The solution can be saved to the memory of the
SmartLeague software program, either for future use or as a
"model" for other installations.
The homepage of the SmartLeague software program is common to
all the programmable devices and is always active, even during the
programming session, in the form of a template:
Project development and programming
PROJECT DEVELOPMENT
AND PROGRAMMING
Using the SmartLeague
software program
downloading data (reading from the
Chapter 6
6-1
27