Table of Contents
Advertisement
2.
Select the part of the system you wish to program from the
tree menu on the left.
3.
Set the parameters in the Programming section on the right.
4.
Write the data on the SmartLinkAdv by clicking on the
During data upload/download operations:
•
All outputs will be forced to standby status.
•
None of the events recognized by the SmartLinkAdv will activate
outputs or be sent to the call queue or recorded in the events
log.
SmartLinkAdv provides the following default access codes:
•
Installer code: 999999
•
User code 1: 000001
This manual is limited solely to instructions regarding navigation
through the software and where to find the various parameters. For
full instructions regarding the complete programming process refer
to the SmartLeague Installation and Configuration manual, supplied
with the software.
In order to reset default programming on the SmartLinkAdv simply
work through the following steps:
1.
Remove all power from the SmartLinkAdv.
2.
Press and hold the reset button (refer to table 2-1, G).
3.
Hold down the reset button and restore power to the Smar-
tLinkAdv.
4.
Wait 5 seconds.
5.
Release the button.
The SmartLinkAdv will restart with the factory default settings.
The maintenance procedures and their regularity are to be decided
by the installer company.
The
system
maintenance
SmartLeague software program.
Programmed parameters, which are saved as solutions, can be used
as "models" for other installations as well as for successive
maintenance operations.
During
the
maintenance
programming parameters of the SmartLinkAdv, compare them with
those already saved in a solution and, then, change and write them
on the apparatus.
SmartLeague provides a section where, prior to a direct connection
with the SmartLinkAdv (refer to paragraph 4-7 PC Connection), it is
possible to carry out real-time monitoring on the entire system.
30
Reset default settings
Maintenance and
phase
requires
phase
it
is
possible
key.
monitoring
the
use
of
the
to
read
the
Project development and programming
Telephone dialler
DEFAULT ACCESS
CODES
6-4
6-5
SOLUTIONS
MONITORING
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartLink Advanced Series and is the answer not in the manual?