Table of Contents
Advertisement
3
Connecting Cables
3.1
UPS Cable Connection Reference
•
Prepare cables away from the cabinets to prevent scraps from falling inside. Cable scraps may
ignite and cause personal injury or device damage.
•
After cables have been installed, clean the cabinets in a timely manner. Keep the cabinets and
surrounding environment clean and tidy.
•
You need to prepare terminals onsite. The stripped length of the copper wire should be the
same as that of the part of the terminal that covers the conductor.
NOTE
The cabling route is for reference only. Connect cables based on site requirements.
3.2
Installing Cables
1. Remove the cover from the power distribution
subrack.
The cover can be removed only when the maintenance bypass switch is OFF.
2. Remove the big cover at the cabinet
bottom and drill holes based on site
conditions, and reinstall the cover.
3
Advertisement
Table of Contents
