Mains Connection; Channels; Sensor Connections - Prevac MG14 Operating Manual

MG14 operating manual Rev 1.4
2.1.4 Standards
Conformity with the Directive relating to electrical equipment designed for use within certain voltage
limits 73/23/EWG
Conformity with the Directive relating to electromagnetic compatibility 89/336/EWG
Harmonized and international/national standards and specifications:
EN 61010-1 (Safety requirements for electrical equipment for measurement, control and
laboratory use)
EN 61000-6-2 (Electromagnetic compatibility generic emission standard)
EN 61000-6-3 (Electromagnetic compatibility generic immunity standard)

2.2 Mains Connection

Voltage
Frequency
Current consumption
Power consumption
Overvoltage category II
Protection class 1
Connection European appliance connector IEC 320 C14
Fuse 3,5 A (in power supply)

2.3 Channels

2.3.1 Sensor Connections

Channel 1:
Sensor connections:
Compatible IONIVAC sensors:
Channel 2:
Sensor connection:
Compatible sensors:
- THERMOVAC transmitters:
- CERAVAC transmitters:
- Ioni transmitters:
90 - 250 VAC
50 - 60 Hz
Max. 3,5 A at 115 V
Max. 1,75 A at 230 V
Max. 250 W
UTG0187SVDEU + BNC
EXTRACTOR gauge IE514, IE414 B-A gauge, and any
Bayard-Alpert sensor
J45
TTR 90, TTR 90S, TTR 91,TTR91S
(CTR): Preferably CTR 90,CTR 91
ITR 90, ITR100
8