Rs232/485/Usb Parameters; Customer Menu - Customer; Service Menu - Service; Information Menu - Information - Prevac MG14 Operating Manual

MG14 operating manual Rev 1.4

4.2.11.4 RS232/485/USB parameters

All three communication standards requires the same software parameters. Those modules can
communicate with the speeds: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,
115200 bps.
8 bits of data, 1 bit stop and no parity parameters are fixed and can not be changed
For hardware connection of RS232/485 either USB Anybus module please refer to datasheet of it.
It can be downloaded from the website:

4.2.12.1 Customer menu - Customer

This menu allows to enter "customer name" ( up to 12 characters ). This "name" is displayed later on
in the network either website of the unit. It allows for the unique unit identification if more than one of
units are connected to the network.
4.2.13.1 Service menu – Service
This menu is intended for manufacturer services only and can be activated only with the correct
password.
4.2.14.1 Information menu – Information
In this menu information about manufacturing date and software version is displayed.

5.Maintenance and Service

5.1 Maintenance

The MG14 does not require any special maintenance work.

5.1.1 Cleaning

For cleaning the outside of the device, a slightly moistened cloth will usually do. Do not use any
aggressive or abrasive cleaning agents.
!
http://www.anybus.com/products/embeddedindex.shtml
DANGER
39