Table of Contents
Advertisement
MG14 operating manual Rev 1.4
The switching functions and the error monitoring system influence the states of several relays inside
of the MG14. The RELAY connection (Fig. 3-4, item E) allows to utilize the relay contacts for
switching purposes. The relay contacts are potential-free (floating).
1 Trigger 1 common (COM)
2 Trigger 1 (NC)
3 Trigger 1 (NO)
4 Trigger 2 common (COM)
5 Trigger 2 (NO)
6 Trigger 3 common (COM)
7 Trigger 3 (NO)
8 Trigger 4 common (COM)
9 Trigger 4 (NO)
COM common
NC normally closed
NO normally open
3.3.8 Anybus module
User has possibilities to operate the unit via one of the "Anybus" module – for exact type please refer
to the chapter: 2.4.2. For exact module description and the pin assignment please refer to the extra
datasheet which is delivered together with the unit
3.3.9 I/O interface
The I/O connections contains the following signal pins:
•
Digital outputs,
•
Analogue outputs
Fig. 3-8 RELAY appliance socket (D-Sub, 9-pin)
20
Advertisement
Table of Contents
