Table of Contents
Advertisement
MG14 operating manual Rev 1.4
3 Installation
3.1 Unpacking
1 Visually inspect the transport packaging for signs of external damage
2 Unpack the MG14 and put the packaging material aside
NOTE:
Keep the packaging material for later use. The MG14 must be stored and transported in the
original packaging material only.
3 Examine the MG14 for completeness
4 Visually inspect the MG14 for signs of damage
!
Damaged product.
Putting a damaged product into operation can be extremely dangerous.
Never attempt to put a damaged product into operation. Secure the damaged product
from unintended operation. Send a damage report to the haulage company or the
insurer.
3.2 Mechanical Installation
The MG14 can be used as follows: As a desk-top device, mounted in a control panel, or mounted in
a 19" rack. In each of these cases you must pay attention to the following safety note:
!
Ambient temperature.
Exceeding the maximum permitted ambient temperature may damage the device.
Make sure that the maximum permitted ambient temperature is not exceeded and that
the air can flow freely through the louvers. Do not expose the device to direct sunlight.
3.2.1 Desk-Top Device
MG14 is delivered with four stuck gummy legs – no other protection is needed. The device can be
use as a desk-top like it is.
DANGER
WARNING
12
Advertisement
Table of Contents
