Communication Interfaces - Prevac MG14 Operating Manual

MG14 operating manual Rev 1.4

2.4.3 Communication interfaces

For network connectivity requirements Anybus CompactCom ( Anybus-CC ) modules has been
implemented.
One of the following Anybus-CC modules can be mounted:
EtherNet/IP
Bluetooth
RS-232
RS-485
USB
- Active module with serial and parallel application interface
- Complete EtherNet/IP adapter
- CIP Parameter Object Support
- Explicit and implicit messaging
- Transformer isolated Ethernet interface 10/100 Mbit/s full
duplex
- TCP/IP socket interface
- FTP server, E-mail and dynamic web server with SSI
support
- Generic EDS-file provided
- Passive module with serial application interface
- Physical layer converter for Bluetooth communication
standard
- Completely transparent interface
- Bluetooth class 2 SPP compatible
- Wireless range up to 30 meters
- Passive module with serial application interface
- Physical layer converter for the RS-232 communication
standard
- Supports baud rates up to 250 kbit/s
- No configuration necessary, since the module acts only
on the physical layer
- Passive module with serial application interface
- Physical layer converter for the RS-485/422
communication standard
- Supports baud rates up to 10 Mbit/s
- No configuration necessary, since the module acts only
on the physical layer
- Galvanically isolated RS-485/422 interface
- Passive module with serial application interface
- Physical layer converter for
- USB communication standard (USB 1.1 & USB 2.0 full
speed)
- Supports 1 and 2 Mbit/s USB communication speed
- The baud rate is set from the host computer side
- Software drivers available
- Galvanically isolated USB interface
11