Trigger's Menu - Triggers Active - Prevac MG14 Operating Manual

MG14 operating manual Rev 1.4
4.2.1.3 Trigger's Menu - Triggers Logic
Triggers relays can be active bellow setting value or above. You can define this in the following
submenu:
Using the narrow buttons ▲or▼ and MENU/ENTER button you can change triggers logic. E.g. in
Fig.4-7 trigger T1 is active below set value (ref. Fig.4-6), and T2 is active above set value.

4.2.1.4 Trigger's Menu - Triggers Active

All triggers can be activated or deactivated. When the setpoint is active works exactly according to
the setpoint values and logic. Inactivation means completely switched off.
Using the narrow buttons ▲or▼ and MENU/ENTER button you can change triggers activation. E.g.
in Fig.4-8 trigger T1 is active, and T2 is inactive.
4.2.2.1 Display mode menu
During the normal operation there are to possibilities of measurement presentation: 'dual' or 'gross'
mode.
Using the narrow buttons ▲or▼ and MENU/ENTER button you can move between option and
confirm current action.
Fig.4-7 Triggers logic setting
Fig.4-8 Triggers logic setting
Fig.4-9 Display Mode Menu
28