Safety Measures - Vitek VT-4202 W Manual Instruction

MULTICOOKER
Description
Multicooker body
1.
Control panel
2.
Bowl
3.
Multicooker lid
4.
Protection screen
5.
Lid opening button
6.
Steam release lid
7.
Steam release opening
8.
Heating element
9.
Temperature sensor
10.
Power cord connector
11.
Spatula
12.
Soup ladle
13.
Measuring cup
14.
Steam cooking basket
15.
Power cord
16.
Drip container
17.
Control panel
«Baking» button
18.
«Porridge» button
19.
«Yogurt» button
20.
«Steam cooking» button
21.
«Stew» button
22.
«Soup» button
23.
«Keep warm/Off» button
24.
•
For additional protection it is reasonable to
install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install RCD contact a specialist.

SAFETY MEASURES

Before connecting and using the unit, read
the instruction manual carefully. Follow all the
warnings and operating recommendations for
operation of the unit listed in this manual. Keep
the instruction for further reference.
• Before using the unit, closely examine the
power cord and the power cord connector
and make sure that they are not damaged.
Do not use the unit if the power cord or the
power cord connector is damaged.
• Before switching the unit on make sure that
your home mains voltage corresponds to unit
operating voltage.
•
The power cord is equipped with "euro plug";
plug it into the socket with reliable grounding
contact.
•
Do not use adapters for plugging the unit in.
•
Make sure that the power cord is properly
inserted into the corresponding connector of
the multicooker and the mains socket.
•
Use only the supplied power cord; do not use
it with other units.
•
Use only the removable parts supplied with
the unit.
•
Place the unit on a flat heat-resistant surface
away from exposure to water, moisture and
open flame.
•
Place the unit with free access to the mains
socket.
•
Install the unit in places with proper
ventilation.
• Do not expose the unit to direct sunlight.
•
Do not place the unit close to walls and
furniture.
•
Avoid contact of the power cord with hot and
sharp surfaces. Avoid damaging the power
cord isolation and connectors.
•
Do not touch the power cord or power plug
with wet hands.
• Do not immerse the unit, power cord and
power plug into water and other liquids.
•
If the unit was dropped into water, unplug
it immediately. Do not put your hands into
water! Apply to the authorized service center
for checking the unit.
•
Do not insert foreign objects, including metal
parts, such as pins or needles, into the
openings of the unit or into its other parts.
•
Do not leave the operating unit unattended.
Always unplug the unit when you are not
using it.
•
In order to avoid burns do not bend over the
steam release opening. Be very careful when
opening the multicooker lid during and after
cooking. Danger of burns by hot steam!
•
Do not use the unit without installed bowl
and also without liquid and/or products in
the bowl.
•
Strictly follow all the recommendations for
amount of dry products and liquids.
•
Do not remove the bowl during operation.
•
Do not cover the unit.
• Do not carry the unit during operation.
Before moving the unit, unplug it and let it
cool down.
•
The body and inner parts of the unit heat up
during the operation. Do not touch them with
bare hands, use potholders.
•
Clean the unit regularly.
3
ENGLISH