8.
If you need to remove the hinge covers from the hinges, remove the two Phillips M1.6 × 2.3 screws (1)
from each hinge cover, and then pull the hinge covers off the hinges (2).
The hinge covers are available as spare part number L98741-001.
9.
If you need to remove the display panel:
a.
The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (1). While
turning the tweezers, wrap the tape around the tweezers (2) as you continue to pull the tape out
from behind the display panel (3). You must pull the tape multiple times before it is completely
removed.
Component replacement procedures
57