Touchpad - HP OMEN 15-ek0000 Maintenance And Service Manual

Table 6-11 IR board description and part number
Description
IR board
IR board cable
Before removing the IR board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drives
4. Remove the battery (see
5. Remove the fans (see
6. Remove the system board (see
Remove the IR board:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the IR board to the computer.
2. Remove the IR board from the computer (2).
Reverse this procedure to install the IR board.

Touchpad

To remove the touchpad, use this procedure and illustration.
(Preparation for disassembly on page
(Bottom cover on page
(Solid-state drive on page
Battery on page 37).
Fans on page 45).
System board on page
31).
32).
48).
Component replacement procedures
Spare part number
L98743-001
L98726-001
31).
51