Memory Modules - HP OMEN 15-ek0000 Maintenance And Service Manual

NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.

Memory modules

To remove the memory modules, use this procedure and illustration.
Table 5-3 Memory module descriptions and part numbers
Description
16 GB, DDR4-3200
8 GB, DDR4-3200
4 GB, DDR4-3200
Before removing a memory module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drive to the left of the battery
4. Remove the battery (see
If you are replacing a memory module, remove the existing memory module:
Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
▲
remove the module (2). Use the same procedure to remove all memory modules.
IMPORTANT:
Do not touch the components on the memory module.
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
To prevent damage to the memory module, hold the memory module by the edges only.
31).
(Solid-state drive on page
37).
Spare part number
L67710-001
L46598-001
L83673-001
31).
32).