HP OMEN 15-ek0000 Maintenance And Service Manual page 62

Table 6-12 Touchpad description and part number
Description
Touchpad
Touchpad cable
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drives
4. Remove the battery (see
Remove the touchpad:
1. Remove the four Phillips M1.6 × 2.3 screws (1) that secure the touchpad bracket to the computer.
2. Remove the bracket from the computer (2).
3. Disconnect the cable from the ZIF connector on the touchpad (1).
4. Lift the protective tape from the top of the touchpad (2) and the tape from over the right screw (3).
5. Remove the three Phillips M2.0 × 2.0 screws (4) that secure the touchpad to the computer.
52 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 31).
(Solid-state drive on page
Battery on page 37).
31).
32).
Spare part number
L98745-001
L98730-001