HP OMEN 15-ek0000 Maintenance And Service Manual page 59

Table 6-10 System board descriptions and part numbers (continued)
Description
System board with integrated Intel Core i5-10300H processor and GeForce GTX 1660Ti, 6 GB graphics card
System board with integrated Intel Core i5-10300H processor and GeForce GTX 1650Ti, 4 GB graphics card
System board with integrated Intel Core i5-10300H processor and GeForce GTX 1650, 4 GB graphics card
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drive to the left of the battery
4. Remove the battery (see
5. Remove the fans (see
When you replace the system board, be sure to remove the following components (as applicable) from the
defective system board and install them on the replacement system board:
Memory modules (see
●
Solid-state drives (see
●
Heat sink (see Heat sink on page
●
Remove the system board:
1. Disconnect the following connectors from the system board:
IR cable (ZIF) (1)
●
Display cable (2)
●
Power connector cable (3)
●
Left speaker cable (4)
●
Card reader/audio board cable (ZIF) (5)
●
● RGB board cable (ZIF) (6)
● WLAN antennas from integrated WLAN module (7)
● Touchpad cable (ZIF) (8)
● RGB board cable (ZIF) (9)
● Right speaker cable (10)
● USB board cable (ZIF) (11)
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 37).
Fans on page 45).
Memory modules on page
Solid-state drive on page
42).
31).
(Solid-state drive on page
34).
32).
Component replacement procedures
Spare part
number
L98749-xx1
L98752-xx1
L98751-xx1
31).
32).
49